Rust-Oleum 995 Silicone Commercial Grade Roof Coating is a 100% silicone, high-solids formula designed to form a durable, breathable, and watertight barrier. It effectively resists ultraviolet radiation and adapts to temperature extremes, ensuring long-lasting protection against weathering.

This coating reflects solar heat to improve energy efficiency and can be applied over a variety of roof types, including spray-applied polyurethane foam, aged single-ply membranes like PVC, EPDM, TPO, Hypalon®, acrylic coatings, concrete, asphalt, modified bitumen, metal, and existing silicone coatings. Ideal for commercial roofing.

• 100% silicone, 95% solids
• Excellent wet/dry adhesion
• 88% reflectivity
• Resists ponding water
• Resists rain after 1 hour
• 5 gallon

For Best Results

Do not thin or alter product. Apply only when air, material, and surface temperatures are between 32-120ºF (0-49ºC). For cold weather application (below 55ºF), store unopened container indoors for 24 hours prior to application. Do not apply if rain is expected in less than 2 hours. Mechanically mix prior to application and during use.

Avoid entraining air when mixing. Apply with a brush, ¾” nap roller or spray equipment. For one coat application, apply at a minimum rate of 1.5 gallons per 100 square feet (25 mils wet). Coating must be applied uniformly and without pinholes. The dry film thickness (DFT) will be approximately 24 mils.