The MAC 101 is a remarkably small, super light and easy-to-use LED moving head wash light with an amazingly bright beam for such a compact luminaire. It features rapid movement and calibrated colors with a low price tag that allows for revolutionary set, stage and decorative lighting design.

FEATURES

• Agile RBG LED Wash-Beam light
• Color calibrated
• 2400 lm output
• Bright and tight beam (13° field angle)
• Smooth, electronic dimming
• Ultra-compact, low weight design (3.7 kg)
• Rapid movement – the fastest MAC ever
• High efficiency, low power consumption, long lifetime

SPECIFICATIONS
PHYSICAL

• Length: 241 mm (9.5 in.) across yoke
• Width: 241 mm (9.5 in.) across yoke
• Height: 304 mm (12.0 in.)
• Weight: 3.7 kg (8.2 lbs.)

DYNAMIC EFFECTS

• Electronic 'color wheel' effect: 33 LEE-referenced colors plus white, color wheel rotation effect, random color
• Color mixing: RGB
• Red: 0 - 100%
• Green: 0 - 100%
• Blue: 0 - 100%
• Color temperature control: Variable 2500 - 10 000 K
• Shutter effect: Electronic, with pulse and random effects
• Electronic dimming: 0 - 100%, four dimming curve options
• Pan: 540°
• Tilt: 240°
• Pan and tilt speed: Adjustable via onboard control panel and DMX

CONTROL AND PROGRAMMING

• Control options: 3 control modes - RGB raw, RGB calibrated, Basic (RGB + CTC disabled)
• RDM: Implemented
• Control resolution: 8-bit, with 16-bit control of pan & tilt
• DMX channels: 8/12
• Setting and addressing: Control panel with backlit graphic display
• Protocol: USITT DMX512-A, ANSI/ESTA E1.20 RDM
• Transceiver: RS-485
• Fixture software update: Via DMX with Martin™ USB Duo DMX Interface Box

OPTICS

• Light source: Cree XP-E high power emitters
• LED refresh rate: 1220 Hz
• Minimum LED lifetime: 50 000 hours (to >70% luminous output)*

*Figure obtained under manufacturer's test conditions:

CONSTRUCTION

• Color: Black or white
• Housing: High-impact flame-retardant thermoplastic
• Protection rating: IP20

INSTALLATION

• Mounting points: One M12 threaded hole for rigging clamp
• Location: Indoor use only, must be fastened to surface or structure
• Orientation: Any
• Minimum distance to combustible materials: 100 mm (4.0 in.) from head, no minimum distance from base
• Minimum distance to illuminated surfaces: 200 mm (7.9 in.)

CONNECTIONS

• AC power input: Neutrik PowerCon
• AC power throughput: Neutrik PowerCon
• DMX data in/out: 5-pin locking XLR

ELECTRICAL

• AC power: 100-240 V nominal, 50/60 Hz
• Maximum total power consumption: 123 W
• Power supply unit: Auto-ranging electronic switch mode
• Main fuse: 5 AT (slow blow)
• Typical power consumption, all effects static, zero light output: <25 W

TYPICAL POWER AND CURRENT

• 100 V, 50 Hz: 122 W, 1.3 A, PF 0.991
• 120 V, 60 Hz: 121 W, 1.1 A, PF 0.987
• 208 V, 60 Hz: 123 W, 0.7 A, PF 0.938
• 230 V, 50 Hz: 123 W, 0.6 A, PF 0.915
• 240 V, 50 Hz: 123 W, 0.6 A, PF 0.900
• PF = power factor:
• Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.:

THERMAL

• Cooling: Forced air (temperature-regulated, low noise, user-definable levels)
• Maximum ambient temperature (Ta max.): 40° C (104° F)
• Minimum ambient temperature (Ta min.): 5° C (41° F)
• Total heat dissipation (calculated, +/- 10%): 420 BTU/hr.